Discontinued OEM / Factory Stripes, Logos and Decals.

 Custom Fabrication for Toyota Trucks and 4Runners. 

 Motorcycle/Auto decals, logos and pin striping.

 

 

 

NEW POLICY - DUE TO RISING PRINT COSTS AND INCORRECT ORDERS

THERE ARE NO RETURNS, REFUNDS OR EXCHANGES ON STRIPES, DECALS AND LOGOS.

Please check and confirm accuracy (style, side and color) of your order at the time of placement. Stripes are produced at the time of order and thus considered special orders. If you are unsure about what to order, please contact me ahead of time to verify your needs.

Orders must be confirmed for damage, completeness and correctness within 48 hours of receipt or YOU ARE ON YOUR OWN.

CURRENT PRODUCTION TIME IS ABOUT 3-4 WEEKS. SORRY FOR THE DELAY.

Items in stock may ship sooner, usually 3-5 days.

 

Check out my 93 4Runner Project build.

Home
Bike Decals & Logos
Toyota Stripes
Nissan Stripes
Ford Stripes
GM Stripes
Dodge Stripes
Mazda Stripes
Jeep Stripes
Misc Stripes & Decals
Urethane Chip Film
Window Graphics
Decal Instructions
4Runner Project
2000 4Runner Build
Parts & Accessories
Paint Samples/Prices
Custom Trailer
Chopper
Ride / Rig Month
Jokes
Articles & Feedback
Fallen Riders
Warranty / Returns
Links 

 

Congratulations to

Troy and Stacey Adams on winning JDC's Custom Chopper!

Purchased winning ticket at the Sun Riders Annual Toy Parade in December.

 

Click on picture for more pics.

 

Parts List and Features

  •     Redneck Engineering High Rise frame (8 out, 5" stretch, 42 deg. rake, 250 rear tire).
  •     Redneck Engineering triple tree (hidden top nut, chromed) and drag bars.
  •     Redneck Engineering fenders and stretched tank with pop up filler.
  •     Rev Tech 100" - 100 horse, fully polished and chromed motor.
  •     RevTech 6 speed tranny and Spyke starter.
  •     Rev Tech 1" offset ring and compensator gear set-up.
  •     Martin Brothers Medustas exhaust pipes.
  •     Franks 41mm, 10 over fork tubes.
  •     Performance front end fork springs.
  •     Pro 1 fork legs (billet, ball milled, chromed).
  •     Pro 1 Pro Street ball milled mirrors (billet and chromed).
  •     Pro 1 Diamond curved plate mount.
  •     Pro 1 Grooved marker lights.   
  •     Arlen Ness hidden handle bar mounting grommets.
  •     Headwinds headlight (billet & ball milled).
  •     Accutronics forward controls w/master (3" extended, billet with roller bearing, chromed).
  •     Joker Machine hand controls w/low profile switches (billet, ball milled, chromed).
  •     Thunder heart electrical controller and wiring harness.
  •     Performance Machine Villain wheels (21X2.15,18X8.5), matching rotors and drive pulley.
  •     Avon rubber (250/40-18, 80/90-H21)
  •     Legends Ball milled front and rear 4 piston brakes (billet & chromed).
  •     Yankee Engineuity top billet motor mount.   
  •     Magnum Chromite II Dual Throttle, Brake, Clutch, Oil and Fuel lines.
  •     Pingel Power Flo high volume petcock.
  •     Carlisle RPP Panther final drive 130 tooth 1.5" belt.
  •     JDC V coil mount with covers.
  •     JDC Ball milled axle, inspection & points cover w /JDC logo (billet & chromed).
  •     JDC smoothed welds, under seat wiring controller, soft tail style mounted rear brake.
  •     Dupont paint provided and backed by FINISHMASTER on Stone Ave.  Spicy Orange
  •     03 Special Construction Titled and Registered in Arizona

** Winner must provide/pay his/her own pick-up and/or delivery arrangements.  Winner responsible for registration and license fees.  Winner must claim, pick-up bike and transfer title on bike within 30 of drawing or forfeit bike.

 

Send mail to james@jamesdeancreations.com with questions or comments about this web site.    
Site best viewed at 1024 X 768      Last modified: 11/21/20  

       Submit Your Site To The Web's Top 50 Search Engines for Free!